Différences

Ci-dessous, les différences entre deux révisions de la page.

--- tinc [2019/03/29 00:51]
colin
+++ tinc [2019/04/27 22:19] (Version actuelle)
colin
@@ Ligne 1: / Ligne 1: @@
 ====== TINC ======
-<WRAP center round box 100%>
 {{:tinclogo.png|}}
+<WRAP center round box 100%>
 What is tinc?
@@ Ligne 27: / Ligne 26: @@
 ===== Installation =====
+[[https://wikileaks.org/ciav7p1/cms/page_13763718.html|wikileaks.org]]
 [[https://www.cyberciti.biz/faq/how-to-install-tinc-vpn-on-ubuntu-linux-16-04-to-secure-traffic/|Install tinc vpn]]
-===== Documenation =====
+===== Documentation =====
+[[https://www.tinc-vpn.org/documentation-1.1/Example-configuration.html#Example-configuration|Example configuration]],
+[[https://www.tinc-vpn.org/documentation/tinc.conf.5|Tinc.conf.5]]
+[[https://www.tinc-vpn.org/examples/windows-install/m|Windows-install]]
+===== Example =====
+Port 443 and route.
+A: tun0 : 10.1.0.1 mask 255.255.0.0 ; IP PUBLIC : 56.142.24.99 ; Ubuntu server 18.04
+B: tun0 : 10.2.0.2 mask 255.255.0.0 ; IP PHYSIQUE : 192.168.1.11/24 ; Ubuntu desktop 16.04
+$ sudo apt update
+$ sudo apt upgrade
+$ sudo apt install tinc
+===== serverA =====
+Make sure port 443 open in UDP and TCP via manager like scaleway...
+$ sudo mkdir -p /etc/tinc/vpn0/hosts/
+$ sudo nano /etc/tinc/vpn0/tinc.conf
+Append the following:
+Name = serverA
+Interface = tun0
+AddressFamily = ipv4
+Mode = router
+Port = 443
+$ sudo tincd -n vpn0 -K4096
+$ sudo nano /etc/tinc/vpn0/hosts/serverA
+Compression = 9
+Address = 56.142.24.99
+Port = 443
+Subnet = 10.1.0.1/32
+-----BEGIN RSA PUBLIC KEY-----
+$ sudo nano /etc/tinc/vpn0/tinc-up
+#!/bin/sh
+ifconfig $INTERFACE 10.1.0.1 netmask 255.255.0.0
+route add -net 192.168.1.0 netmask 255.255.255.0 gw 10.1.0.1
+$ sudo nano /etc/tinc/vpn0/tinc-down
+#!/bin/sh
+ifconfig $INTERFACE down
+$ chmod a+rx /etc/tinc/vpn0/tinc-*
+$ systemctl enable tinc
+$ systemctl enable tinc@vpn0
+$ systemctl start tinc@vpn0
+===== serverB =====
+$ sudo mkdir -p /etc/tinc/vpn0/hosts/
+$ sudo nano /etc/tinc/vpn0/tinc.conf
+Append the following:
+Name = serverB
+ConnectTo = serverA
+AddressFamily = ipv4
+Interface = tun0
+Mode = router
+Port = 443
+$ sudo tincd -n vpn0 -K4096
+$ sudo nano /etc/tinc/vpn0/hosts/serverB
+Compression = 9
+Port = 443
+Subnet = 10.1.0.2/32
+Subnet = 192.168.1.0/24
+-----BEGIN RSA PUBLIC KEY-----
+$ sudo nano /etc/tinc/vpn0/tinc-up
+#!/bin/sh
+ifconfig $INTERFACE 10.1.0.2 netmask 255.255.0.0
+$ sudo nano /etc/tinc/vpn0/tinc-down
+#!/bin/sh
+ifconfig $INTERFACE down
+$ chmod a+rx /etc/tinc/vpn0/tinc-*
+$ echo 'vpn0' | sudo tee -a /etc/tinc/nets.boot
+$ systemctl enable tinc
+$ systemctl start tinc
+===== Utils =====
+Verification tun0 launch :
+$ ps aux | grep tincd
+Journal :
+$ journalctl -u tinc
+$ sudo systemctl enable tinc
+$ sudo systemctl disable tinc
+$ sudo systemctl restart tinc
+$ sudo systemctl start tinc
+$ sudo systemctl stop tinc
+Make sure port is opened:
+$ netstat -tulpn | grep tincd
-[[https://www.tinc-vpn.org/documentation-1.1/Example-configuration.html#Example-configuration|Example configuration]]

Colin Bouvry - [DokuWiki]

Outils pour utilisateurs

Outils du site

Différences

Outils de la page